北京pk10Zhejiang Ruifeng Machinery Equipment Co., Ltd.
Contact person: Mr. Ma
北京pk10Mobile phone: 18905728938
Address: 88 Tianxin Road, Xinshi Town, Deqing County
Spraying paint and powder spraying are two completely different methods of painting. Spraying paint is to use compressed air to disperse the liquid paint (commonly known as paint spray particles) to adhere to the surface of the coating, while spraying powder is to disperse the powder spray particles into the surface of the coating by means of compressed air arch powder under the action of high-pressure electrostatic force, which is adsorbed by electric field.
The correct name for powder spraying is electrostatic powder spraying, which is not simply done with a spray gun. The electrostatic powder spraying equipment is composed of powder barrel (powder supply with compressed air), high voltage electrostatic generator and electrostatic powder spraying gun. Varieties mainly include outdoor powder, and outdoor powder, indoor powder is mainly epoxy type of outdoor powder is mainly polyester resin type; and paint is basically two components of things.
Generally speaking, phenolic paint on the market, which does not contain curing agent, is relatively inexpensive, of course, all aspects of data (including weather resistance, adhesion, hardness, salt spray, etc.) will be worse; of course, there are many kinds of paint, such as metal paint for automobiles, polyurethane paint adhesion is very good, in the function of rust prevention, powder spraying and spraying paint. Each has its own strengths, and there is no absolute superiority. The most important premise is the pre-disposal method of steel appearance. The workpiece appearance must be oil-free and rustless. If we can make a phosphating film (now pottery, and silane process), of course, it is the best. This is a chemical disposal method, which has limited construction conditions and requires proprietary equipment. In the past two years, the environmental protection department has paid close attention to chemical disposal methods. Many units have changed to mechanical physics. The most commonly used equipment is sand blasting machine, which can remove rust on the surface of the workpiece and a small amount of oil, and also meet the spraying process.
北京pk10Paint according to: polyurethane paint to analyze and calculate: 40% solid content of paint, paint cost: 50 yuan, air spraying sprayable: 6 square, about = 8 yuan / square, primer about 7 yuan / square; at least two spraying total cost: 15 yuan / square.
北京pk10Powder according to: epoxy powder analysis calculation: spray thickness of about 60 um, no solvent 100% solid. The cost of powder coatings is 20 yuan/kg, and 1 kg powder can be sprayed 8 square meters. The total cost is about 2.5 yuan/square. The powder needs solidification, heat energy and heating cost are 1 yuan/square. But the large workpiece is the chassis of the machine, the outer shell, the electric box and other products, and the thickness is thicker. The heating cost is about 3 yuan/square. Cost: 5.5 yuan per square meter.
北京pk10Other Cost Analysis: Spray paint needs water curtain cabinet or dry spray paint room, because 30-40% of the paint is wasted, this paint is also needed to be disposed of, the cost of disposal is about 0.5 yuan/square, the application rate of powder is 100%, the recovery of indoor gas emissions, no disposal costs; paint contains harmful substances such as formaldehyde, toluene, xylene, which is more harmful to workers'health, and Secondary spraying increases a lot of manpower and material resources; powder spraying workpiece: the coating is thicker, can cover up some, spraying can not achieve traces; and after powder solidification, the coating is harder, not easy to touch flowers, and the machine equipment is more advanced;
Overall analysis: powder spraying is the best choice.